DC 12.0V 245 RPM MOTOR WITH JST PH 2.0 FEMALE CONNECTOR
I haven’t found any Documentation for This Motor e.g. what is the diameter of the axis, Length, high, length of the axis, what kind of Wheels to use, where to buy the wheels, what kind of mount you need for the wheels, etc. How to mount it on a Totem XL Maker Kit which I bought today…
Hi,
is there a data sheet available for the 12V dc motors included in the robot car set?
The label on the motors only says 12V, 400 rpm, but nothing about current, torque, stall current and stall torque.
Hello, these motors are used in RoboCar and Black Spider kits. I don’t have all the required information at the moment, but will share if get some more.
| Voltage | 12V |
| Stall current | 1.5 A |
| Speed | 400 RPM |
| Shaft diameter | 4 mm |
| Shaft length | 10 mm |
| Shaft type | D-Shaped |
| Wire length | 150 mm |
| Connector | JST PH 2.0 Female |
| Application | Higher speed |
| Motor | 25MM DC MOTOR 400 RPM (shop) |
| Kit | RoboCar (shop) |
| Shaft attachment | LEAD WHEEL SET (shop) |
| Mounting | RoboCar instructions (page 45) |
| Mounting bracket (flat) | 25MM DC MOTOR BRACKET (shop) |
| Mounting bracket (flat) | TM145 25mm DC motor bracket (STL) |
| Mounting bracket (RoboCar) | TM416 25 mm DC motor bracket (STL) |
| Voltage | 12V |
| Stall current | 1.5 A |
| Speed | 245 RPM |
| Shaft diameter | 6 mm |
| Shaft length | 15 mm |
| Shaft type | D-Shaped |
| Wire length | 150 mm |
| Connector | JST PH 2.0 Female |
| Application | Higher torque |
| Motor | DC 12.0V 245 RPM (shop) |
| Kit | Black Spider (shop) |
| Shaft attachment | SHAFT COUPLER 6 MM (shop) |
| Mounting | Black spider instructions (page 55) |
| Mounting bracket | TM249 37 mm DC Motor Plate (STL) |
Thank you for your fast response! Great support!
That’s helpful, thanks.
