Dremel 3mm rod cutter and groover

Thanks to GreaseMonkey88 for letting me adapt his Rod and Tube Cutter for Dremel. This can be found at Rod and Tube Cutter for Dremel by GreaseMonkey88 - Thingiverse.

I added a height adjustor using a M6 coach-bolt and printed knurled knob. Just drill a 5mm hole and tap M6.

I also used two M10x40 set screws for the pivot instead of the 10mm tube or rod recommended. Doesn’t look that nice but it is functional.

Please find the files attached.

Knurled Knob.stl (20.8 KB)
M3 base adaptor.stl (16.6 KB)